#18 keychain camera manual

Switching between Video and Photo Standby modes The camera can be switched between Video Standby and Photo Standby by briefly pressing the power button.
Do not format sdxc cards (cards with a capacity of 64GB and more) see below Breaking the Rules.
Detailed instructions can be found in the program by clicking the Help button.
EBay seller hxelepro360 claims to be "the original 808 #11 developer, not the same developer as 808 #16". .The camera is now ready for use and has the update firmware loaded.You should only update the firmware if you are having problems with the current firmware or the new firmware provides functionality you require that are not available in your current version.The colors are still over-saturated to my eye like the #11, and get more saturated as the light level decreases.Recording will continue as long as there is movement detected.Firmware Update Normally, there is no need to update the firmware.Bootloader Update The bootloader is responsible for correctly loading and updating the firmware.If the camera is used for monitoring only, for example fpv, it is imperative to ensure that Automatic Power Off is disabled in order to prevent signal loss when Standby times out.Installing the bootloader requires the exact same procedure as installing the firmware, which is described below.




The AVI structure is fractured in a way that will not allow random access for decoding the video.Take a Photo (snapshot) while recording: Briefly press the power button to take a picture.Defective cables are the most common problems when the camera is not correctly recognized by the.Auto Record and Motion Detect are conflicting values.Confirm that the cable is not defective by attaching another USB device using the same cable.Loop recording, the camera does the typical stop/save/continue (S/S/C) sequence to save individual clips, but the clips are 20:01 minutes long, not exactly 20:00 min.
Once motion is detected, it will take a second or two until the firmware starts recording.